FEATURES
• The LS3 is our 3 foot model available with 2 motor sizes. Best for compact to small tractors.
• Engineered for lower flow hydraulic systems than those on skid steers.
• An affordable solution for cutting slopes compared to the units used by many local municipalities.
• The only residential/small farm unit available for cutting vertically. Ideal for maintaining roads, trails, plantations, hunting lanes, and more.
• Easily cuts 2-3” saplings, underbrush, and limbs on slopes around ponds and in tight spots.
• American made using American parts and labor.
• 11 Cutting Positions: 0° level with ground directly in front or to the right side of machine, 25° - 45° great for ditches, pond edges, slopes, and 90° perfect for hunting lanes, roads, and tree plantation rows.
• Two-sided Blades: Allows for cleaner cuts and extends blade life span. Easy to remove and flip to keep cutting.
• Cutting deck is constructed of 1 /8” plate and 1 / 4” plate reinforcement for the spindle and motor mount. Additional reinforcement using 1 / 4” angle iron throughout.
• Heavy Duty 5/16” Skid Steer Plate: Each skid steer plate is built from 5/16” plate steel using our CNC Plasma Table.
• Off-set Cutting Position: Add 44 inches to cut width when coupled with a rear PTO brush cutter.
• Open Front Design: Blades protrude 2” from the center of the deck allowing for a closer cut and easier access to dense brush.
• Integrated John Deere™ Hook System: 400 & 500 Series—Pin style loader. Available adapter plate to accommodate the tractors equipped with John Deere™ Global/Euro quick connect system. (Item ordered separately.)
COMPATIBILITY
Most midsize tractors with SSQA attachment system and proper auxiliary flow. (Minimum 5 GPM) Must have auxiliary hydraulics or Lane Shark Valve Kit. Pressure from auxiliary, return to sump. Not designed for skid-steers. To ensure total compatibility with your machine, please contact your dealer for more information.
Located in the panhandle of Florida Lane Shark USA manufactures the original FEL mounted brush cutter designed for the compact to midsize tractor. American owned using American parts.
Specifications are subject to change without prior notice. Similar models may be shown in addition to the featured model. Equipment may be shown with options.
• The LS3 is our 3 foot model available with 2 motor sizes. Best for compact to small tractors.
• Engineered for lower flow hydraulic systems than those on skid steers.
• An affordable solution for cutting slopes compared to the units used by many local municipalities.
• The only residential/small farm unit available for cutting vertically. Ideal for maintaining roads, trails, plantations, hunting lanes, and more.
• Easily cuts 2-3” saplings, underbrush, and limbs on slopes around ponds and in tight spots.
• American made using American parts and labor.
• 11 Cutting Positions: 0° level with ground directly in front or to the right side of machine, 25° - 45° great for ditches, pond edges, slopes, and 90° perfect for hunting lanes, roads, and tree plantation rows.
• Two-sided Blades: Allows for cleaner cuts and extends blade life span. Easy to remove and flip to keep cutting.
• Cutting deck is constructed of 1 /8” plate and 1 / 4” plate reinforcement for the spindle and motor mount. Additional reinforcement using 1 / 4” angle iron throughout.
• Heavy Duty 5/16” Skid Steer Plate: Each skid steer plate is built from 5/16” plate steel using our CNC Plasma Table.
• Off-set Cutting Position: Add 44 inches to cut width when coupled with a rear PTO brush cutter.
• Open Front Design: Blades protrude 2” from the center of the deck allowing for a closer cut and easier access to dense brush.
• Integrated John Deere™ Hook System: 400 & 500 Series—Pin style loader. Available adapter plate to accommodate the tractors equipped with John Deere™ Global/Euro quick connect system. (Item ordered separately.)
COMPATIBILITY
Most midsize tractors with SSQA attachment system and proper auxiliary flow. (Minimum 5 GPM) Must have auxiliary hydraulics or Lane Shark Valve Kit. Pressure from auxiliary, return to sump. Not designed for skid-steers. To ensure total compatibility with your machine, please contact your dealer for more information.
Located in the panhandle of Florida Lane Shark USA manufactures the original FEL mounted brush cutter designed for the compact to midsize tractor. American owned using American parts.
Specifications are subject to change without prior notice. Similar models may be shown in addition to the featured model. Equipment may be shown with options.
- $3,999.00
- Yulee, Florida
- New
- LS3
- 2021
- Lane Shark
- LS3
- Available